Sony firmware update for s3700 update#
Sony firmware update for s3700 software#
Sony firmware update for s3700 download#

Sony firmware update for s3700 download#

Again the progress bar showing x % and the download capacity are displayed on the television.

Sony firmware update for s3700 update#

When completed, the Blu-ray Disc player will restart itself and the second portion of the update will begin.

Note: The x changes to 0 through 100, indicating the update progress.

During the update, the progress bar showing x % and the download capacity are displayed on the television.

The first portion of the update process begins.

Select Start and then press the ENTER button.

Sony firmware update for s3700 software#

The message Update to a new software version along with the latest software version is displayed on the television.

Select OK to proceed with the Update via Internet process.

A New Software Version available message will be prompted.

At the Home Screen menu, use the arrow keys on the remote control to select Setup - Software Update and then press the ENTER button.

If there is a disc in the player, please remove the disc.

Make sure the Blu-ray player is connected to your Internet source using an Ethernet cable or wireless router.

Power on the television and make sure it is tuned to the inputs to which the Blu-ray Disc player is connected.

Note: The firmware update process usually takes about 15 to 30 minutes, depending on system configuration and network connection. Failure to follow the instructions may interrupt the update process and may cause the Blu-ray Disc player to be unresponsive or to require repair. WARNING! Please follow the update instructions carefully.

It is highly recommended that you print out these instructions for use as a reference during the installation process.

It is recommended that you have a network speed above 512Kbps to use the Update via Internet to avoid a slow firmware update process.

In order to perform the firmware update, it is necessary to have the player correctly connected to a compatible television.

Note: If you cannot connect the player to your Internet source, please see the Download and Transfer the Update File to Your USB Storage Device section below for information about firmware update USB options.

In order to use this update method it is necessary to have the player correctly connected to an active Internet connection.Loss of power during the installation of the firmware update may cause the Blu-ray Disc player to be unresponsive or to require repair. WARNING! Do not power off the Blu-ray Disc player or disconnect it from the AC power outlet.WARNING! Please follow the update instructions carefully.If you have not done so already, please check the current firmware version to determine if this firmware update is needed for your Blu-ray Disc player.

Sony highly recommends that you use the Update via Internet method to update the Blu-ray Disc player firmware. The Update via Internet operation is straightforward. If you have questions or require assistance, please contact Sony Support at 1-866-909-SONY (7669). Please see the Download and Transfer the Update File to Your USB Storage Device section below, for more information.If you cannot connect the Blu-ray Disc player to your Internet source, please use the USB update method.Please see the Update via Internet Instructions section below, for more information.You will need to connect the Blu-ray Disc player to your Internet source using an Ethernet cable or wireless router.Sony highly recommends that you use the Update via Internet method. The Update via Internet operation is straightforward.There are two ways to update the Blu-ray Disc player firmware: